-8 inputs for DC or AC in the range from 12 to 230 V -8 relay contact outputs locked in pairs against each other for controlling 4 ? AC 230V sunblind drives -Contact rated voltage AC 230 V -Contact rated current 6 A, p.f. = 1 -Electronics powered by a 230 V AC integrated power supply -Device functional even without bus connection or if the bus communication fails -Preset on delivery for direct output control for each blind button function via momentary contact switches connected to the inputs -Green LED to indicate standby -Key for switching between bus and direct mode -Yellow LED for indicating direct mode activated -Button for each relay contact output, for switching the output in direct mode while the button is held down -LED per input to indicate the relevant signal status -Selectable function for each input when using the ETS: -Switching status, send binary value -Switching on leading edge, switching Short/Long -1-pushbutton dimming, sunblind control, group control -1-bit/8-bit scene control -8-bit/16-bit value leading edge, Short/Long -16-bit floating point value leading edge, Short/Long -Or for each pair of inputs: -Acting directly on the corresponding outputs as blind button -2-button dimming with stop telegram or with cyclical sending -2-pushbutton sunblind control -Selectable blocking of each input via a corresponding blocking object -Sending of input objects after change -Selectable cyclical input object sending -Individual or shared configuration of actuator channels -Communication objects for each blind channel for driving the sun protection into the end positions or for stopping the procedure and adjusting the blind slats in steps -Communication objects for setting position of slats and blinds in percentage information -Automatic opening of the blind slats to a preconfigured nominal setting after uninterrupted driving down of the blind from the top to the bottom end position, with integrated 1-bit scene control for storing and calling up (reproduction) of 2 interim blind and slat settings -Integrated 1-bit/8-bit scene control, 8 scenes can be integrated per channel -Optional Sun object for integration in a sunlight tracking control system -Differentiation between automatic and manual mode and with automatic switchover from automatic to manual mode for the channel in question by pressing a bus button for manual control of the corresponding sun protection -Manual mode taking precedence over automatic position commands -Optional central command for each device or each channel for switching the relevant channels to automatic mode and driving the sun protection into the up or down end position -Alarm: move to safety position, Locking in this position for as long as alarm is active -Travel lock (e. g. for cleaning the outer shutter/blinds) -Status objects for each channel for querying or for automatic sending of sun protection and slat settings as a percentage value -Optional status objects for reporting that the up or down position has been reached -Integrated bus coupling unit -Bus connection via bus terminal or contact system to data rail -Modular installation devices for mounting on TH35 EN 60715 mounting rail The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.
Модель: 5WG15011AB01
Цена:
В корзину
