-4 Inputs for AC/DC 12...230 V -Max. cable length, unshielded, twisted 100 m -Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 ... 2.5 mm [/2] -The following functions can be selected per input: -Switching state/send binary value -Switch edge/short/long switch -Dimming, shading control, single button group control -1/8-bit scene control -8-bit value edge -8-bit value short/long -16-bit floating-point value edge -16-bit floating-point short/long - pulse counting with/without limit value monitoring (8/16/32 Bit) -The following functions can be selected per input pair: -2-pushbutton dimming with stop telegram (4 bit) and 2-pushbutton shading control -Optional blocking of each input by means of the respective blocking object -Transmission of the input objects after change -Optional cyclic transmission of input objects -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal The AP 641 room control box and AP 118 automation module box must be ordered separately. See Chapter Modular Installation System - Room control box - Module boxes.

-2 Floating relay contacts -Rated contact voltage AC 230 V -Rated contact current 10 A -Integrated bus coupling unit -Modular installation device for mounting in AP 118 automation module box or AP 641 room control box -Bus-powered electronics -Bus connection via bus terminal, Integrated bus coupling units -Configurable behavior in the event of a bus voltage failure/recovery -Unchanged switching state of outputs in the event of system voltage failure -Integrated 8-bit scene control -Time functions: off delay, on delay, timer mode (automatic stairwell switch), night mode (lighting for cleaning), Warning of impending off -Logical functions: Positively driven operation, Logic function (1 object), Logic function (2 objects), Can be inverted per output (NO contact/NC contact) -Transmitting status per channel -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal

-2 Floating relay contacts -Rated contact current 10 A -10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector

-2 Floating relay contacts -Rated contact current 10 A -2 x 230 V AC, 10 A (resistive load) -For mounting in AP 118 automation module box or AP 641 room control box -Incl. bus connection module

-1 slot for a sensor/actuator module, type RS or RL -Separate connection compartment and strain relief for bus cable and functional lines -Modular installation device with screw fixing for installation in linking ducts, under raised floors or for surface mounting on the ceiling -Enclosure: Plastic -Degree of protection: IP20

-8 slots for a sensor/actuator module, type RS or RL -Internal bus cable for connection of the sensor/actuator module to the bus -Separate connection compartment and strain relief for functional lines -Two PE/N bars for accommodation of the PE and neutral conductor of the functional lines -Bus connection via bus terminal -Modular installation device with screw fixing for installation under raised floors, on the wall or ceiling or in wet rooms -Enclosure: Plastic -Degree of protection: IP54

-10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector -Screw fixing -1 channel (one up and one down each)

1 channel (one up and one down each)

-1 channel -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Electrically interlocked relays (for reversing direction of rotation) -maintenance-free terminals for connection and through-wiring of untreated single-core‚ stranded or multi-core conductors‚ 0.5 ... 2.5 mm2 -Configurable behavior in the event of a bus voltage failure/recovery -Automatic mode for sunlight tracking control -Manual and standard mode -Status: Transmitting status per channel, status position of sun protection, 8-bit, status position of slats, 8-bit -Integrated 1-bit/8-bit scene control -8 scenes to be integrated per channel -Travel lock (e. g. for cleaning the outer shutter/blinds) -Separate raising/lowering protection -Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active -Individual configuration of actuator channels -Adaptation of objects and functions to drive type -Suitable for integration in a sunlight tracking control system -End position detection -Using position data (8-bit value) for sun protection control (up/down) and slat control (open/closed) -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal The AP 641 room control box and AP 118 automation module box must be ordered separately. See Chapter Quick-assembly system - Room control box.

-2 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Electrically interlocked relays (for reversing direction of rotation) -maintenance-free terminals for connection and through-wiring of untreated single-core‚ stranded or multi-core conductors‚ 0.5 ... 2.5 mm2 -Configurable behavior in the event of a bus voltage failure/recovery -Automatic mode for sunlight tracking control -Manual and standard mode -Status: Transmitting status per channel, Status position of sun protection, 8-bit, Status position of slats, 8-bit -Integrated 1-bit/8-bit scene control -8 scenes to be integrated per channel -Travel lock (e. g. for cleaning the outer shutter/blinds) -Separate raising/lowering protection -Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active -Individual configuration of actuator channels -Adaptation of objects and functions to drive type -Suitable for integration in a sunlight tracking control system -End position detection -Using position data (8-bit value) for sun protection control (up/down) and slat control (open/close) -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal -For mounting in AP 118 automation module box or AP 641 room control box The AP 641 room control box and AP 118 automation module box must be ordered separately.See Chapter Quick-assembly system - Room control box.

-1 floating relay contact -Rated contact voltage, 230 V AC -Rated contact current 16 AX / 20 AX -Modular installation device for mounting in AP 118 automation module box or AP 641 room control box -Switching operation and operating hours counter -Configurable behavior in the event of a bus voltage failure/recovery -Unchanged switching state of outputs in the event of system voltage failure -Integrated 8-bit scene control -Time functions: off delay, on delay, timer mode (automatic stairwell switch), night mode (lighting for cleaning), Warning of impending off -Logical functions: Positively driven operation, logic function (1 object), logic function (2 objects), can be inverted per output (NO contact/NC contact) -Transmitting status per channel -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal The AP 641 room control box and AP 118 automation module box must be ordered separately.See chapter Modular Installation System - Room Control Box.

-10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector -Function bus coupling unit for clipped on bus wall switches or other bus devices -Mounting frame -For installation in flush-mounting switch and socket boxes with ? 60 mm The AP 641 room control box and AP 118 automation module box must be ordered separately.

-Without mounting frame -For installation in flush-mounting switch and socket boxes with ? 60 mm The AP 641 room control box and AP 118 automation module box must be ordered separately.

-One output for switching and dimming resistive, inductive or capacitive loads -Automatic adjustment to leading edge or trailing edge control, depending on the type of load -Rated operational voltage AC 230 V -Rated frequency 50...60 Hz -Rated power at +35°C ambient temperature: 10&#133,250 VA -Electronic protection of the output against overload, short circuit and temperature rise -Reporting of overload, short circuit and temperature rise via the bus -Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5...2.5mm? -Selectable mode for each output (normal mode, one- or two-level timer mode, blinking) -Adjustable on- and off-delay -Separately adjustable dimming time from 0...100 % for switching on / off and dimming brighter / darker -Two dimming value objects, each with individually adjustable dimming time from 0...100 % -The ability to switch an output on or off by dimming brighter / darker -Adjustable dimming value when switching on -Immediate activation (jumping) or dimming to a new dimming value -Selectable additional status object switching and / or status object dimming value for each output -Additional object for each output for blocking / releasing the output -Sending of status objects on request and / or automatically after a change -Adjustable blocking time for sending status objects after restart and bus voltage recovery -Adjustable dimming value for each output in the event of bus voltage failure and recovery, as well as for mains voltage recovery -Additional night mode object for time-limited switching on the output (and hence illumination) at night -Adjustable on period at night or with timer mode -Selectable warning of imminent switching off the illumination by dimming to 50 % of the previous dimming value during night mode or timer mode -Integrated 8-bit scene control and integration of each output in up to 8 scenes -Separately adjustable dimming time for scene control -Selectable counting of operating hours and with threshold monitoring of the operating hours -Selectable counting of load cycles and with threshold monitoring of the load cycles -Bus-powered electronics -Integrated bus coupling units, Bus connection via bus terminal The AP 641 room control box and AP 118 automation module box must be ordered separately.See Chapter Quick-assembly system - Room control box.