Option module for usage with system controller PXC001..D.

-Интерфейс между контроллером (PXC64-U и PXC128-U) и шиной модулей TX-I/O -Встроенный блок питания DC 24 V, 1.2 A для питания модулей TX-I/O и периферии -USB-порт для подключения ПК

Output current 160 mA The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

Output current 320 mA The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

Output current 640 mA The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

Контроллеры для управления климатом и освещением в отдельных помещениях. -PID-регулирование охлаждающими потолками и радиаторами -Модули расширения для управления освещением и жалюзи -LonMark-совместимая коммуникация -Управление 2 термическими приводами AC 24 В (ШИМ) или 1 моторным AC 24 В (3-точечное регулирование) -Выходные сигналы сухих контактов для управления освещением (16 A) -Винтовые клеммы

-8 slots for a sensor/actuator module, type RS or RL -Internal bus cable for connection of the sensor/actuator module to the bus -Separate connection compartment and strain relief for functional lines -Two PE/N bars for accommodation of the PE and neutral conductor of the functional lines -Bus connection via bus terminal -Modular installation device with screw fixing for installation under raised floors, on the wall or ceiling or in wet rooms -Enclosure: Plastic -Degree of protection: IP54

Контроллеры RXC20.1, RXC21.1 и RXC22.1 применяются для управления по температуре в отдельных помещениях. -Для 2- или 4-трубных фэнкойлов с или без переключения -Для охлаждающих потолков и радиаторов -Упрвление термическими приводами клапанов AC 24 V, ШИМ, приводами клапанов и заслонок AC 24 V (3-точечное) или воздушным электронагревателем -Безпотенциальные релейные контакты для управления скоростями вентилятора -LonMark-совместимая коммуникационная шина -Встроенные винтовые клеммыОписание приложения: CA110300

The flush-mounted room unit QMX3.. consists of: -Operator unit -Bezel, titanium white -Base plate and KNX plug.Functionality: -Freely configurable user interface (keys and visual items) as part of Total Room Automation -RoomOptiControl energy efficiency function -Room temperature measurement -Display of room temperature, control mode, scenes etc. (dot matrix LCD) -Backlit display, white or blue selection -KNX PL-Link interface to the room automation station with plug & play functionality -Can be combined with different standard and design bezels

-Acquisition of the room temperature -Room temperature setpoint adjustment -Powered by solar cell -A gateway is mandatory (EnOcean / KNX) -Optional use of battery if light conditions are insufficient -Including design frame DELTA line, titan white For use with units from the following product ranges: -RXB (together with gateway EnOcean/KNX, RXZ97.1/KNX) -Devices with KNX Communication

-Acquisition of the room temperature -Room temperature setpoint adjustment -Freely-programmable button -Step switch (5 stages) -Powered by solar cell -A gateway is mandatory (EnOcean / KNX) -Optional use of battery if light conditions are insufficient -Including design frame DELTA line, titan white For use with units from the following product ranges: -RXB (together with gateway EnOcean/KNX, RXZ97.1/KNX) -Devices with KNX Communication

Cable kit to connect the LONWORKS interface card (LonDongle) or PCC-10 in the PC to the LONWORKS network.

Нет описания

-10-pole BTI socket (BTI - Bus Transceiver Interface) for plugging of bus terminal devices with BTI connector -Screw fixing -1 channel (one up and one down each)

1 channel (one up and one down each)

-1 channel -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Electrically interlocked relays (for reversing direction of rotation) -maintenance-free terminals for connection and through-wiring of untreated single-core‚ stranded or multi-core conductors‚ 0.5 ... 2.5 mm2 -Configurable behavior in the event of a bus voltage failure/recovery -Automatic mode for sunlight tracking control -Manual and standard mode -Status: Transmitting status per channel, status position of sun protection, 8-bit, status position of slats, 8-bit -Integrated 1-bit/8-bit scene control -8 scenes to be integrated per channel -Travel lock (e. g. for cleaning the outer shutter/blinds) -Separate raising/lowering protection -Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active -Individual configuration of actuator channels -Adaptation of objects and functions to drive type -Suitable for integration in a sunlight tracking control system -End position detection -Using position data (8-bit value) for sun protection control (up/down) and slat control (open/closed) -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal The AP 641 room control box and AP 118 automation module box must be ordered separately. See Chapter Quick-assembly system - Room control box.

-2 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Electrically interlocked relays (for reversing direction of rotation) -maintenance-free terminals for connection and through-wiring of untreated single-core‚ stranded or multi-core conductors‚ 0.5 ... 2.5 mm2 -Configurable behavior in the event of a bus voltage failure/recovery -Automatic mode for sunlight tracking control -Manual and standard mode -Status: Transmitting status per channel, Status position of sun protection, 8-bit, Status position of slats, 8-bit -Integrated 1-bit/8-bit scene control -8 scenes to be integrated per channel -Travel lock (e. g. for cleaning the outer shutter/blinds) -Separate raising/lowering protection -Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active -Individual configuration of actuator channels -Adaptation of objects and functions to drive type -Suitable for integration in a sunlight tracking control system -End position detection -Using position data (8-bit value) for sun protection control (up/down) and slat control (open/close) -Bus-powered electronics -Integrated bus coupling units, bus connection via bus terminal -For mounting in AP 118 automation module box or AP 641 room control box The AP 641 room control box and AP 118 automation module box must be ordered separately.See Chapter Quick-assembly system - Room control box.

Replacement Label Holders For modules manufactured from fall 2010.