-4 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 120 Vand electromechanical limit switches -Rated contact voltage AC 120 V, 50 Hz -Automatic mode for sunlight tracking control -Manual mode -Indication of direct operation with status object -Status position of slats, 8-bit -Suitable for integration in a sunlight tracking control system -Sun protection control (up/down) using position data (8-bit value) -Integrated power supply unit for the electronics, connected to AC 120 V -Slat control (open/close) using position data (8-bit value) or travel to end position, stopping, stepwise adjustment The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

- Управление 2 приводами жалюзи

-2 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Integrated isolating relay function for connection of 2 drives per channel -Electrically interlocked relays (for reversing direction of rotation) -Rated contact voltage AC 230 V, 50 Hz -Rated contact current 6 A -Configurable behavior in the event of a bus voltage failure -Alarm (Wind, Rain, Frost): Move to safety position, locking in this position for as long as alarm is active -Shared configuration of actuator channels -Adaptation of objects and functions to drive type -Sun protection control (up/down) -Using position data (8-bit value) -Travel to end position, stopping, stepwise adjustment -Slat control (open/closed) -Using position data (8-bit value) -Travel to end position, stopping, stepwise adjustment sun protection control (up/down) and slat control (open/close) -Bus-powered electronics -Integrated bus coupling units -Bus connection via bus terminal or contact system to data rail -Modular installation devices for mounting on TH35 EN 60715 mounting rail The data rail must be ordered separately. See chapter System Products and Accessories - data rails.

-For the separate control per actuator channel of a sun protection, damper, door or window drive with a motor for AC 230 V and electromechanical or electronic limit switches -Integrated electronics for detection of the actuation of an electromechanical limit switch and with auto-calibration of the travel time from one limit switch to the other -Electrically interlocked relays to reverse the direction of rotation -Relay contacts rated for nominal voltage AC 230 V, 8 A (resistive load) -Configuration by the user whether all actuator channels are to be identically or individually parameterized -Communication objects per actuator channel for moving the sun protection to the limit positions or to stop travel and for step-by-step adjustment of the blind slats -Communication objects for moving the sun protection and adjusting the blind slats directly to a new position (as precisely as drive mechanics permit) by positioning commands as percentage values -Automatic opening of blind slats up to a set position after the blinds have been lowered without any stop from the upper to the lower limit position -Integrated 1-bit scene control for save and recall of 2 favored positions of blind and slats -Integrated 8-bit scene control and assignment of up to 8 scenes per channel -Optional object “Sunshine” for activation / deactivation of sunlight tracking of the slats for shading with greatest possible daylight component -Differentiation between automatic and manual mode and with automatic switchover from automatic to manual mode of the respective actuator channel on activation of a bus pushbutton for manual control of the sun blind -Priority of manual mode over automatic positioning commands -Alarm object per device or per channel for moving the sun protection to the configured safety position in the event of a wind alarm e.g. and with blocking of travel to another position as long as alarm pending -Travel blocking object per device or per channel for blocking the sun protection in its current position (needed during cleaning of an outdoor Venetian blind e.g.) -Status objects per actuator channel for query or automatic transmission of sun blind and slat position as percentage value -Electronics powered via an integrated power supply unit for AC 230 V -Green LED for displaying the 230 V operating voltage -Pushbutton for switchover between bus mode and direct mode -Yellow LED for display of activated direct mode -Two pushbuttons each per actuator channel for drive control in direct mode -Integrated in the actuator housing and operational if the actuator is supplied with AC 230 V (even if bus voltage missing or communication not operational) -Integrated bus coupling unit with only half a standard bus load -Bus connection via bus terminal or contact system to data rail -Modular installation devices for mounting on TH35 EN 60715 mounting rail The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

-4 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Rated contact voltage AC 230 V, 50 Hz -Status position of slats, 8-bit -Integrated 1-bit scene control, 2 Scenes to be integrated per channel -Separate raising/lowering protection -Integrated power supply unit for the electronics, connected to AC 230 V -Sun protection control (up/down) using position data (8-bit value) The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

-4 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Rated contact voltage AC 230 V, 50 Hz -Automatic mode for sunlight tracking control -Manual mode -Indication of direct operation with status object -Status position of slats, 8-bit -Suitable for integration in a sunlight tracking control system -Sun protection control (up/down) using position data (8-bit value) -Integrated power supply unit for the electronics, connected to AC 230 V -Slat control (open/close) using position data (8-bit value) or travel to end position, stopping, stepwise adjustment The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

-8 channels -For the separate control per actuator channel of a sun protection‚ damper‚ door or window drive with a motor for AC 230 V and electromechanical limit switches -Rated contact voltage AC 230 V, 50 Hz -Configurable behavior in the event of a bus voltage failure -Configurable behavior in the event of a system voltage recovery -Automatic mode for sunlight tracking control -Manual mode -Indication of direct operation with status object -Status position of slats, 8-bit -Integrated 1-/8-bit-scene control, 8 Scenes to be integrated per channel -Suitable for integration in a sunlight tracking control system -Sun protection control (up/down) using position data (8-bit value) -Integrated power supply unit for the electronics, connected to AC 230 V -Slat control (open/close) using position data (8-bit value) or travel to end position, stopping, stepwise adjustment The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.

-4 channels (one up and one down each) -Rated contact voltage AC 230 V, 50 Hz -Integrated 1-bit scene control, 2 Scenes to be integrated per channel -Integrated power supply unit for the electronics, connected to AC 230 V -Separate raising/lowering protection The optional data rail must be ordered separately. See chapter System Products and Accessories - data rails.